Technical parameters:
– Bowl diameter: 300 mm
– L/D: 4.0
– Bowl speed: 4500 rpm
– G-force: 3400 g
– Motor: 15 Kw
– Capacity: 20 m3/h
– Manufacturing year: 2016
UCD305-00-32 Decanter Centrifuge Applications
UCD305-00-32 Decanter Centrifuge from GEA Westfalia Separator is a continuously operating horizontal solid wall centrifuge for dewatering requirements of industrial waste water sludge, as well as municipal wastewater treatment plants.
Materials of UCD305-00-32 Decanter Centrifuge
All parts coming into contact with the product are made of CrNiMo stainless steel. All gaskets coming into contact with the product are made of NBR (Perbunan).
The machine is coated in Seevenax RAL 6011 green, a synthetic resin paint.
Working principle
Separation takes place in a horizontal cylindrical bowl equipped with a screw conveyor. The feed enters the bowl through a stationary inlet tube and is accelerated smoothly by an inlet distributor. The centrifugal force that stems from the rotation then causes sedimentation of the solids on the wall of the bowl.
The conveyor rotates in the same direction as the bowl, but at a different speed, thus moving the solids towards the conical end of the bowl. The cake leaves the bowl through the solids discharge openings into the casing. Separation takes place throughout the entire length of the cylindrical part of the bowl, and the clarified liquid leaves the bowl by flowing over adjustable plate dams into the casing.
